)
)
)
)
)
)
WA3 Pro-X Compressor
Department of Labour approved pressure vessel to AS1210 class 3 approval number 84586
- Designed working pressure 900kpa
- Water capacity of pressure vessel - 17 litres
- Compact and lightweight design
- Reliable Honda GX 160 QX petrol engine
- Series 1500 Clisby hookah compressor - 3 cyclinder
- Unit will deliver up to 14cfm. 12cfm is recommended (350 1.p.m)
- Austenitic chromium nickel steel is used for the pressure vessel
- Filter system delivers air to the air purity requirement of AS2299
- Twin filters on the WA3 are easy to recharge - no special tools required
- Water traps: 2 internal and one external
- Overall dimension: 785mm long - 485mm wide - 500mm high
- 57 kilo in overall weight
Introducing the WA3 Pro-X
This hookah unit is the result of years of research and development, ongoing
because of the ever-increasing need for safer and more efficient products in the work place and the recreational
fields.
The new unit has retained much of its origin in that the pressure receiver, motor and filtration system have remained the same. The big change has come in the form of a new pump. The components are from Clisby but the final building of the compressor is controlled by Wolf-Air compressors.
Starting with a thorough inspection of the bare compressor block, the unit is assembled with great care and attention to detail. The new combination fan/flywheel/pulley is balanced on its shaft to minimise vibration and belt slap, resulting in a very smooth running compressor.
The inlet and outlet manifolds are manufactured from a high quality stainless steel to prevent corrosion and the compressor heads are checked to ensure correct port size. Upon completion of the assembly procedure, the compressor is cleaned and surface treated with a compound which is extremely tough, UV resistant and resists chipping. This provides and excellent barrier against corrosion.
In essence, the compressor unit is taken to original design drawing specifications and then improved further.
Technical data
| Pump | Clisby |
| Model | Series 1500 |
| Compressor pump block construction | Cast aluminium |
| Medium | Air |
| Displacement | 566 l/mis (20 cfm) |
| Fad | 325.6 l/mis (11.4 cfm) |
| Intake pressure | Atmospheric |
| Temp range | n/a |
| Operating pressure | 8.2 bar (120 psi) |
| No. of cylinders | 3 w type |
| No. of stages | 1 |
| Bore x stroke | 63.5 x 38.1mm x3 |
| Valves | Reed type of stress relieved spring steel |
| Speed (max) | 1080 rpm |
| Oil capacity | 1000ml |
| Oil type | Castrol SN 68 |
| Inclination | 2% |
| Required drive input | 2.2kw (3hp) electric |
| Drive | A section |
| Pulley size | 225mm (10 inch) cast iron |
| Cooling | Fan |
| Weight | 18.2 kg |
| Dimensions | (lx wx h) 413 x 232 x 311 mm |
HOME : Compressors : [WA2] [WA3 Pro-X] [WA4 Pro] General Info : Contact Wolf-Air : Top